CWDM SM Pigtailed DFB Laser Diode

Wavelength: 1270-1610nm

LD Type: Fiber Pigtailed

LD Chip: DFB

Fiber Type: SMF-28e Fiber




CWDM SM Pigtailed DFB Laser Diode
      CWDM Wavelength SM Pigtailed DFB ( Distributed Feedback) Laser Diode is a semiconductor optoelectronic product 
which can output stable CWDM laser light from 1270-1610nm by the pigtailed singlemode fiber, it's widely used in CWDM 
System, Fiber Optic Sensor Application, the DFB Laser Diode also with PD built in to monitor the signal power, the pigtail 
also can be customized to MM, PM type upon request.
Application: Features:
CWDM System
Fiber Optic Sensor
Laser Imaging
Testing System
Low Threshold Current
High Output Power
PD and Isolator Built In
High Reliability
Absolute Maxmum Ratings:
Parameter Symbol Value Unit
LD Forward Current If 150 mA
LD Reverse Voltage Vr 2 V
PD Forward Current If(PD) 2 mA
PD Reverse Voltage Vr(PD) 15 V
Operating Temperature T -40~+85
Storage Temperature T -40~+85
Solder Temperature T 260
Lead Solder Time 10 S
Notice: Above specifications should not be exceeded, or the LD will be seriously damaged.
Optical and Electrical Specification:
Parameter Symbol Min. Tpy. Max. Unit Test Condition
Center Wavelength λc λc-10 λc λc+10 nm
Optical Power Po 1 2 4 mW CW
Spectral Width @-20dB Δλ 1 2 nm CW
Optical Isolation For Single Stage ISO 30 35 dB
For Dual Stage ISO 50 55 dB
Threshold Current Ith  4 10 15 mA CW
LD Operating Current Iop 30 35 mA CW, Po=2mW
LD Forward Voltage Vf 1.2 1.5 V CW
Response Time (Raise/Fall) Tr/Tf
0.4 ns
Monitor Dark Current Id 1 nA Vr(PD)=5V
PD Monitor Current Im 0.1
1 mA CW
Modulation Bandwidth BW 1.25 2.5 4.25 GHz
Side Mode Suppression Ratio SMSR 35 40 dB
Fiber Type SMF-28e Fiber
Notice: Above specifications are tested in room temperature at 23.
            Specifications may change without notice.
Drawing:
Pin Information:
Ordering Information (Part Number):
 SMDPLD-WWWW-OO-I-S-P-FF-J-LL-CC
 WWWW  OO  I   S   P   FF  J  LL  CC
 Wavelength  Optical
 Power
 Isolator  Saddle Type  Pin 
 Assingment
 Fiber Type  Fiber Jacket  Fiber Length  Connector
 1270 - 1270nm  01 - 1mW  N - None  A - Type A  A - Type A  S2 - SMF-28e  B - 250um   05 - 0.5m  NE - None
 1290 - 1290nm  02 - 2mW  S - Single  B - Type B  B - Type B        Bare Fiber  10 - 1.0m  FA - FC/APC
          .  03 - 3mW  D - Dual  C - Type C  C - Type C  L - 900um 
 15 - 1.5m  FU - FC/UPC
          .  SS - Specify  D - Type D       Loose Tube  20 - 2.0m  LA - LC/APC
          .  E - Type E  SS - Specify  LU - LC/UPC
 1590 - 1590nm   SA - SC/APC
 1610 - 1610nm   SU - SC/UPC
 SS - Specify
Notification:
1. The Semiconductor Optoelectronic products are particulary sensitive of ESD (electro-static discharge), it's recommended to 
    use grounded anti-static wrist straps and grounded anti-static mats before handling the products. 
2. Never plug or unplug the products under a living circuit, setting the current supply to zero before switching on or switching 
    off the laser diode.
3. Always take anti-static measures to storage the products when not in use.

 
Leave A Message
If you are interested in our products and need to know more details, please feel free to leave a message here, we will reply within 24 hours.
Related Products
SM Pigtailed DFB LD 1310nm SM Pigtailed DFB Laser Diode
Wavelength: 1310nm LD Type: Fiber Pigtailed LD Chip: DFB Fiber Type: SMF-28e Fiber
SM Pigtailed DFB LD 1550nm SM Pigtailed DFB Laser Diode
Wavelength: 1550nm LD Type: Fiber Pigtailed LD Chip: DFB Fiber Type: SMF-28e Fiber
SM Pigtailed DFB LD 1577nm SM Pigtailed DFB Laser Diode
Wavelength: 1577nm LD Type: Fiber Pigtailed LD Chip: DFB Fiber Type: SMF-28e Fiber
SM Pigtailed DFB LD 1625nm SM Pigtailed DFB Laser Diode
Wavelength: 1625nm LD Type: Fiber Pigtailed LD Chip: DFB Fiber Type: SMF-28e Fiber
SM Pigtailed DFB LD 1650nm SM Pigtailed DFB Laser Diode
Wavelength: 1650nm LD Type: Fiber Pigtailed LD Chip: DFB Fiber Type: SMF-28e Fiber
940nm TGG Based 3-port Polarization Insensitive Optical Circulator 940nm TGG 3-port Polarization Insensitive Optical Circulator
Wavelength: 940nm Circulator Type: Polarization Insensitive Port: 3 ports Fiber Type: HI 1060 Fiber Max. Handling Power: 500mW CW
1950nm High Power Double Clad Polarization Insensitive Optical Isolator High Power Double Clad 1950nm Polarization Insensitive Optical Isolator
Wavelength: 1950nm Isolator Type: Polarization Insensitive Fiber Type: 10/130 0.15/0.46 Double Cladding Fiber Max. CW Handling Power: 1, 3, 5, 10 or specify Max. Peak Power: 5, 10 kW
PM In-line Phase Shifter 1550nm PM In-line Phase Shifter
Wavelength: 1550nm Phase Shift: typ. π/2 Fiber Type: PM 1550 Panda Fiber Max. Optical Power: 500mW CW or specify
Product Categories
Sign Up To Newsletter
to stay up-to-date on our promotions, discounts, sales, news and more.

Leave A Message

Leave A Message
If you are interested in our products and need to know more details, please feel free to leave a message here, we will reply within 24 hours.

Home

Products

skype

whatsapp