| 850nm Multimode Tap PD | ||||||||||||||
|
850nm Multimode Tap PD is an optoelectronic component which can detect the input optical signal power and output a part of light by a fixed ratio. It features compact package, high responsibility, Low dark current and low insertion loss, it's widely used in WDM System, Optical Line Protection, EDFA, the tap ratio could be customized by customer. |
||||||||||||||
|
||||||||||||||
|
Application: |
Features: |
|||||||||||||
|
WDM System Optical Line Protection EDFA Testing System |
High Responsibility Low Insertion Loss Low Dark Current High Reliability |
|||||||||||||
| Specification: | ||||||||||||||
| Parameter | Symbol | Value | Unit | |||||||||||
| Bandwidth | BW | 770-860 | nm | |||||||||||
| Tap Ratio | 5 | % | ||||||||||||
| Max. Insertion Loss | IL | 0.8 | dB | |||||||||||
| Responsibility | 15~36 | mA/W | ||||||||||||
| Min. Return Loss | RL | 30 | dB | |||||||||||
| Max. Dark Current | Id | 2 | nA | |||||||||||
| Max. Reverse Voltage | Vr | 5 | V | |||||||||||
| 3dB Bandwidth | 10 | MHz | ||||||||||||
| Fiber Type | 50/125, 62.5/125 MM fiber | - | ||||||||||||
| Max. Tensil Load | 5 | N | ||||||||||||
| Max. Optical Power (CW) | P | 300 | mW | |||||||||||
| Operating Temperature | T | 0~70 | ℃ | |||||||||||
| Storage Temperature | T | -40~85 | ℃ | |||||||||||
| Package Dimension | Φ6x24 | mm | ||||||||||||
| Notice: Above specifications are tested at center wavelength without connector in room temperature @23℃. | ||||||||||||||
| For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower. | ||||||||||||||
| Drawing: | ||||||||||||||
|
||||||||||||||
| Ordering Information (Part Number): | ||||||||||||||
| MMTPD-WWW-RR-D-FF-J-LL-CC | ||||||||||||||
| WWW | RR | D | FF | J | LL | CC | ||||||||
| Wavelength | Tap Ratio | Package Dimension | Fiber Type | Fiber Jacket | Fiber Length | Connector | ||||||||
| 850 - 850nm | 01 - 1/99 | 1 - Φ6.0x24mm | M5 - 50/125 | B - 250um Bare Fiber | 05 - 0.5m | NE - None | ||||||||
| 02 - 2/98 | M6 - 62.5/125 | 9 - 900um Loose Tube | 10 - 1.0m | FA - FC/APC | ||||||||||
| 05 - 5/95 | 15 - 1.5m | FU - FC/UPC | ||||||||||||
| 10 - 10/90 | 20 - 2.0m | SA - SC/APC | ||||||||||||
| SS - Specify | SS - Specify | SU - SU/APC | ||||||||||||
| LA - LC/APC | ||||||||||||||
| LU - LC/UPC | ||||||||||||||
| SS - Specify | ||||||||||||||
| Notification: | ||||||||||||||
|
1. The Semiconductor Optoelectronic products are particulary sensitive of ESD (electro-static discharge), it's recommended to use grounded anti-static wrist straps and grounded anti-static mats before handling the products. 2. Always take anti-static measures to storage the products when not in use. |
||||||||||||||
|
||||||||||||||
