| 1260-1650nm All Band PM Tap PD | ||||||||||||||
|
1260-1650nm All Band Tap PD is an optoelectronic component which can detect the input optical signal power and output a part of light by a fixed ratio. It features compact package, high responsibility, Low dark current and low insertion loss, it's widely used in WDM System, Optical Line Protection, EDFA, the tap ratio could be customized by customer. |
||||||||||||||
|
Application: |
Features: |
|
||||||||||||
|
WDM System Optical Line Protection EDFA Testing System |
High Responsibility Low Insertion Loss Low Dark Current High Reliability |
|||||||||||||
| Specification: | ||||||||||||||
| Parameter | Symbol | Value | Unit | |||||||||||
| Bandwidth | BW | 1260-1650 | nm | |||||||||||
| Tap Ratio | 1 | 2 | 5 | 10 | % | |||||||||
| Max. Insertion Loss | IL | 0.5 | 0.6 | 0.7 | 1.0 | dB | ||||||||
| Responsibility | 2~20 | 5~35 | 10~75 | 30~150 | mA/W | |||||||||
| Min. Extinction Ratio | ER | 20 | dB | |||||||||||
| Max. Polarization Mode Dispersion | PMD | 0.1 | ps | |||||||||||
| Min. Return Loss | RL | 45 | dB | |||||||||||
| Max. Dark Current | Id | 5 | nA | |||||||||||
| Max. Reverse Voltage | Vr | 5 | V | |||||||||||
| Min.Breakdown Voltage | Vr | 20 | V | |||||||||||
| Max. Forward Current | If | 5 | mA | |||||||||||
| Max. Capacitance | C | 2 | pF | |||||||||||
| Max. ESD Threshold | 200 | V | ||||||||||||
| 3dB Bandwidth | 2 | GHz | ||||||||||||
| Fiber Type | SMF-28e | - | ||||||||||||
| Max. Tensil Load | 5 | N | ||||||||||||
| Max. Optical Power (CW) | P | 300 | mW | |||||||||||
| Operating Temperature | T | -10~70 | ℃ | |||||||||||
| Storage Temperature | T | -40~85 | ℃ | |||||||||||
| Package Dimension | Φ2.6x30 or Φ5.5x23 | mm | ||||||||||||
| Notice: Above specifications are tested at center wavelength without connector in room temperature @23℃. | ||||||||||||||
| For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower. | ||||||||||||||
 Drawing:
|
||||||||||||||
| Ordering Information (Part Number): | ||||||||||||||
| PMTPD-WW-RR-D-J-LL-CC | ||||||||||||||
| WW | RR | D | J | LL | CC | |||||||||
| Wavelength | Tap Ratio | Package Dimension | Fiber Jacket | Fiber Length | Connector | |||||||||
| AB - 1260-1650nm | 01 - 1/99 | 1 - Φ2.6x30mm | B - 250um Bare Fiber | 05 - 0.5m | NE - None | |||||||||
| All Band | 02 - 2/98 | 2 - Φ3.0x22mm | 9 - 900um Loose Tube | 10 - 1.0m | FA - FC/APC | |||||||||
| 05 - 5/95 | 3 - Φ5.5x23mm | 15 - 1.5m | FU - FC/UPC | |||||||||||
| 10 - 10/90 | 20 - 2.0m | SA - SC/APC | ||||||||||||
| SS - Specify | SS - Specify | SU - SU/APC | ||||||||||||
| LA - LC/APC | ||||||||||||||
| LU - LC/UPC | ||||||||||||||
| SS - Specify | ||||||||||||||
| Notification: | ||||||||||||||
|
1. The Semiconductor Optoelectronic products are particulary sensitive of ESD (electro-static discharge), it's recommended to use grounded anti-static wrist straps and grounded anti-static mats before handling the products. 2. Always take anti-static measures to storage the products when not in use. |
||||||||||||||
|
||||||||||||||
