400-1100nm SM Pigtailed SI Avalanche Photodiode

Wavelength: 400-1100nm

PD Type: Fiber Pigtailed APD

Chip Material: SI

Fiber Type: SM

Inquiry now Download pdf

product introduction

400-1100nm SM Pigtailed SI Avalanche Photodiode

400-1100nm SM Pigtailed SI Avalanche Photodiode is a semiconductor optoelectronic product designed for detecting
light signal by transfering the light signal to electric signal, SM Pigtailed Avalanche Photodiode utilizes the avalanche
multiplication effect to amplify the optoelectronic signal to improve the detection sensitivity, it's widely used in fiber optic
sensor and Laser Lidar field, the pigtailed fiber can be customized upon request.

Application:

Features:

Laser Lidar
Fiber Optic Sensor
Computed Tomography
High Resolution OCT

High Response
Low Dark Current
High Multiplication Gain
High Reliability

Absolute Maxmum Ratings:

Parameter

Symbol

Value

Unit

Reverse Voltage

0.95*Vbr

Forward Current

Operating Temperature

-40~+85

℃

Storage Temperature

-40~+85

℃

Solder Temperature

260

℃

Lead Solder Time

Notice: Above specifications should not be exceeded, or the Photodiode will be seriously damaged.

Optical and Electrical Specification:

Parameter

Symbol

Min.

Tpy.

Max.

Unit

Condition

Wavelength Range

400

1100

Maximum Peak Input Power

0.15

10ns, 10kHz

Dark Current

0.03

M=100

Responsivity

λ=905nm

0.58

A/W

1uW, M=1

Multiplication
gain

λ=905nm, 0.8Vbr

1uW

λ=905nm,0.85Vbr

100

1uW

Operating Voltage

110

Breakdown Reverse voltage

Vbr

120

200

Ir=10uA

Junction capacitance

M=100, f=1MHz

Active Diameter

230

Response Time

0.3

λ=905nm

Return Loss

Fiber Type

SM Fiber

Notice: Above specifications are tested in room temperature at 25℃.

Specifications may change without notice.

Wavelength VS Responsivity Curve:

Drawing:

Pin Information:

Ordering Information (Part Number):

SMIFAPD-WWW-AAA-S-P-J-LL-CC

WWW

AAA

Response
Wavelength

Active Diameter

Saddle Type

Pin
Assingment

Fiber Jacket

Fiber Length

Connector

905 - 905nm

Z23 - Φ0.23mm

A - Type A

B - 250um Bare Fiber

05 - 0.5m

NE - None

SSS - Specify

SS - Specify

B - Type B

L - 900um Loose Tube

10 - 1.0m

FA - FC/APC

C - Type C

15 - 1.5m

FU - FC/UPC

D - Type D

20 - 2.0m

LA - LC/APC

E - Type E

SS - Specify

LU - LC/UPC

SA - SC/APC

SU - SC/UPC

ST - ST/UPC

Notification:

1. The Semiconductor Optoelectronic products are particulary sensitive of ESD (electro-static discharge), it's recommended
to use grounded anti-static wrist straps and grounded anti-static mats before handling the products.
2. Always take anti-static measures to storage the products when not in use.