400-1100nm Fast SM Pigtailed SI Photodiode 2.5GHz

Wavelength: 400-1100nm

PD Type: SM Fiber Pigtailed

PD Chip: SI

Inquiry now Download pdf

product introduction

400-1100nm Fast SM Pigtailed SI Photodiode 2.5GHz

400-1100nm Fast SM Pigtailed SI Photodiode is a semiconductor optoelectronic product designed for detecting light
signal by transfering the light signal to electric signal, SM Pigtailed SI Photodiode is built with Silicon chip material and
terminated with SM pigtail to detect the light with high responsibility and low dark current, it's widely used in fiber optic
sensor and optic electric communication field, the pigtailed fiber can be customized upon request.

Application:

Features:

Fiber Communication
Fiber Optic Sensor
Computed Tomography
Testing System

High Response
Low Dark Current
Low Capacitance
High Reliability

Absolute Maxmum Ratings:

Parameter

Symbol

Value

Unit

Reverse Voltage

Forward Current

Operating Temperature

-40~+85

℃

Storage Temperature

-40~+85

℃

Solder Temperature

260

℃

Lead Solder Time

Notice: Above specifications should not be exceeded, or the Photodiode will be seriously damaged.

Optical and Electrical Specification:

Parameter

Symbol

Min.

Tpy.

Max.

Unit

Condition

Wavelength Range

400

1100

Saturated Optical Power

Vr=10V

Dark Current

0.1

Vr=0V

100

Vr=10V

Responsivity

λ=405nm

0.20

A/W

Vr=0V

λ=650nm

0.35

A/W

λ=850nm

0.55

A/W

λ=905nm

0.58

A/W

λ=1064nm

0.10

A/W

Operating Voltage

Breakdown Reverse voltage

Ir=10uA

Frequency Bandwidth

2.5

GHz

Junction capacitance

Vr=0V

Vr=10V

Active Diameter

0.2

Response Time (Raise/Fall)

Tr/Tf

150

Return Loss

Fiber Type

SM Fiber

Notice: Above specifications are tested in room temperature at 25℃.

Specifications may change without notice.

Wavelength VS Responsivity Curve:

Drawing:

Pin Information:

Ordering Information (Part Number):

SMSIFPD-WWW-AA-S-P-J-LL-CC

WWW

Test
Wavelength

Active Diameter

Saddle Type

Pin
Assingment

Fiber Jacket

Fiber Length

Connector

405 - 405nm

Z2 - Φ0.2mm

A - Type A

B - 250um Bare Fiber

05 - 0.5m

NE - None

650 - 650nm

SS - Specify

B - Type B

L - 900um Loose Tube

10 - 1.0m

FA - FC/APC

850 - 850nm

C - Type C

15 - 1.5m

FU - FC/UPC

905 - 905nm

D - Type D

20 - 2.0m

LA - LC/APC

1064 - 1064nm

E - Type E

SS - Specify

LU - LC/UPC

SSS - Specify

SA - SC/APC

SU - SC/UPC

ST - ST/UPC

Notification:

1. The Semiconductor Optoelectronic products are particulary sensitive of ESD (electro-static discharge), it's recommended
to use grounded anti-static wrist straps and grounded anti-static mats before handling the products.
2. Always take anti-static measures to storage the products when not in use.