200-1100nm SM Pigtailed SI Photodiode

Wavelength: 200-1100nm

PD Type: SM Fiber Pigtailed

PD Chip: SI

Inquiry now Download pdf

product introduction

200-1100nm SM Pigtailed SI Photodiode

200-1100nm SM Pigtailed SI Photodiode is a semiconductor optoelectronic product designed for detecting light signal
by transfering the light signal to electric signal, SM Pigtailed SI Photodiode is built with Silicon chip material and terminated
with SM pigtail to detect the light with high responsibility and low dark current, it's widely used in fiber optic sensor and
optic electric communication field, the pigtailed fiber can be customized upon request.

Application:

Features:

Fiber Communication
Fiber Optic Sensor
Computed Tomography
Testing System

High Response
Low Dark Current
Low Capacitance
High Reliability

Absolute Maxmum Ratings:

Parameter

Symbol

Value

Unit

Reverse Voltage

Forward Current

Operating Temperature

-40~+85

℃

Storage Temperature

-40~+85

℃

Solder Temperature

260

℃

Lead Solder Time

Notice: Above specifications should not be exceeded, or the Photodiode will be seriously damaged.

Optical and Electrical Specification:

Parameter

Symbol

Min.

Tpy.

Max.

Unit

Condition

Wavelength Range

200

1100

Saturated Optical Power

Vr=5V

Dark Current

0.2

Vr=0V

Vr=5V

Responsivity

λ=200nm

0.08

A/W

Vr=0V

λ=405nm

0.15

A/W

λ=650nm

0.32

A/W

λ=905nm

0.44

A/W

λ=1064nm

0.27

A/W

Operating Voltage

Breakdown Reverse voltage

100

Ir=10uA

Frequency Bandwidth

1000

mHz

Junction capacitance

Vr=0V

4.5

Vr=5V

Active Diameter

mm²

Response Time (Raise/Fall)

Tr/Tf

0.6

Return Loss

Fiber Type

SM Fiber

Notice: Above specifications are tested in room temperature at 25℃.

Specifications may change without notice.

Wavelength VS Responsivity Curve:

Drawing:

Pin Information:

Ordering Information (Part Number):

SMSIPD-WWW-A-S-P-J-LL-CC

WWW

Test
Wavelength

Active Diameter

Saddle Type

Pin
Assingment

Fiber Jacket

Fiber Length

Connector

200 - 200nm

1 - 1x1mm

A - Type A

B - 250um Bare Fiber

05 - 0.5m

NE - None

405 - 405nm

S - Specify

B - Type B

L - 900um Loose Tube

10 - 1.0m

FA - FC/APC

650 - 650nm

C - Type C

15 - 1.5m

FU - FC/UPC

808 - 808nm

D - Type D

20 - 2.0m

LA - LC/APC

905 - 905nm

E - Type E

SS - Specify

LU - LC/UPC

1064 - 1064nm

SA - SC/APC

SSS - Specify

SU - SC/UPC

ST - ST/UPC

Notification:

1. The Semiconductor Optoelectronic products are particulary sensitive of ESD (electro-static discharge), it's recommended
to use grounded anti-static wrist straps and grounded anti-static mats before handling the products.
2. Always take anti-static measures to storage the products when not in use.