1550nm Semiconductor Optical Amplifier Module | ||||||||||
1550nm Semiconductor Optical Amplifier (SOA) Module is a optic active product which can boost the intensity of optical signal in a fiber optic communication system. The SOA module intergrated with SOA driver, which can generate 5-500ns pulse width, the TEC and Thermistor built in to control the device temperature. It features high optical gain, high saturation output power, it's widely used in Optical Line Amplifier, Optic Non-linear Application and Optoelectronic Integration field, the output signal power can be customized. | ||||||||||
|
||||||||||
Application: |
Features: |
|||||||||
Optical Line Amplifier Optic Non-linear Application Optoelectronic Integration WDM System |
High Optical Gain Low Polarization Sensitivity TEC and Thermistor Built In High Reliability |
|||||||||
Optical and Electrical Specification: | ||||||||||
Parameter | Symbol | Min. | Tpy. | Max. | Unit | |||||
Center Wavelength | λc | 1525 | 1550 | 1565 | nm | |||||
3dB Wavelength Bandwidth | BW | 40 | nm | |||||||
3dB Saturated Output Power | P | 23 | dBm | |||||||
Input Optical Power | P | -25 | 10 | dBm | ||||||
Small Signal Gain @Pi=-25dBm | G | 15 | dB | |||||||
Gain Ripple | ΔG | 1.0 | 1.5 | dB | ||||||
Noise Figure | 7.5 | 9 | dB | |||||||
Polarization Dependent Gain | PDG | 0.5 | 1.0 | dB | ||||||
Pulse Extinction Ratio | ER | 50 | dB | |||||||
SOA Operating Current | Iop | 250 | 300 | mA | ||||||
TEC Current | Itec | 1.5 | A | |||||||
TEC Voltage | Vtec | 3.5 | V | |||||||
TEC Set Temperature | T | 15 | 35 | ℃ | ||||||
Switching Properties (Fall/Rise time) | Tr/Tf | 2 | 3 | ns | ||||||
Pulse Frequency | F | 1K | 5M | Hz | ||||||
Modulation Signal Format | TTL/LVTTL | - | ||||||||
Operating Temperature | T | -10 | 60 | ℃ | ||||||
Storage Temperature | T | -40 | 85 | ℃ | ||||||
Operating Humidity | 5 | 90 | %RH | |||||||
Fiber Type | SMF-28e Fiber or PM 1550 Panda Fiber | |||||||||
Pulse Signal Source Specification: | ||||||||||
Parameter | Symbol | Min. | Tpy. | Max. | Unit | |||||
Pulse Width | Pw | 5 | 500 | ns | ||||||
Pulse Width Turning Resolution | 2.5 | ns | ||||||||
External Trigger Input | Signal Format | LVTTL (5V) | - | |||||||
Trigger Mode | Rising Edge Trigger | - | ||||||||
Coupling Mode | DC | - | ||||||||
Impedance | 50 | Ω | ||||||||
External Pulse Trigger Input | High Level | Uh | 2 | 3.8 | 4.5 | V | ||||
Low Level | Ul | 0 | 0.4 | 0.6 | V | |||||
Synchronous Signal Output | LVTTL (5V) | - | ||||||||
Electric Signal Connector | SMA | - | ||||||||
Operating Voltage | DC 12±15% | V | ||||||||
Operating Current | 500, 1000 | mA | ||||||||
Communication Mode | RS232 | - | ||||||||
Notice: Above specifications are tested at in room temperature at 23℃. | ||||||||||
Specifications may change without notice. | ||||||||||
Drawing: | ||||||||||
|
||||||||||
Ordering Information (Part Number): | ||||||||||
SOAM-WWWW-M-OO-CC-FF-CC | ||||||||||
WWWW | M | OO | CC | FF | CC | |||||
Wavelength | Laser Mode | Output Power | Operating Current | Fiber Type | Connector | |||||
1550 - 1550nm | C - CW | 05 - 5dBm | 5H - 500mA | SM - Non-PM Fiber | FA - FC//APC | |||||
P - Peak | 13 - 13dBm | 8H - 800mA | PM - PM Fiber | FU - FC/UPC | ||||||
23 - 23dBm | 1T - 1000mA | |||||||||
SS - Specify | ||||||||||