S+C+L Band Polarization Insensitive Optical Isolator | |||||||
S+C+L Band Polarization Insensitive Optical Isolator is a fiber passive component built with singlemode fiber, it allows light signal to be delivered in one forward direction and avoid the back reflection light, it's widely used in amplifier system, fiber optic sensor system to protect the light source and lower down the optical signal noise. High power type is available upon request. |
|||||||
|
|||||||
Application: |
Features: |
||||||
Fiber Amplifier Fiber Optic Sensor Fiber Laser Lab & Research |
High Isolation Low PDL Low Insertion Loss High Reliability |
||||||
Specification: | |||||||
Parameter | Symbol | Value | Unit | ||||
Operating Wavelength | λ | 1460-1620 | nm | ||||
Typ. Insertion Loss | IL | 0.5 | dB | ||||
Max. Insertion Loss | IL | 0.8 | dB | ||||
Typ. Peak Isolation | Iso | 58 | dB | ||||
Min. Isolation | Iso | 35 | dB | ||||
Max. Polarization Dependent Loss | PDL | 0.1 | dB | ||||
Max. Polarization Mode Dispersion | PMD | 0.2 | ps | ||||
Min. Return Loss | RL | 50 | dB | ||||
Max. Optical Power (CW) | P | 500 | mW | ||||
Max. Tensil Load | 5 | N | |||||
Fiber Type | SMF-28e | - | |||||
Operating Temperature | T | -5~70 | ℃ | ||||
Storage Temperature | T | -40~85 | ℃ | ||||
Package Dimension | Φ5.5×L35 | mm | |||||
Notice: Above specifications are tested at center wavelength without connector in room temperature @23℃. | |||||||
For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower. | |||||||
Drawing: | |||||||
Ordering Information (Part Number): | |||||||
PIISO-WWW-J-LL-CC | |||||||
WWW | J | LL | CC | ||||
Wavelength | Fiber Jacket | Fiber Length | Connector | ||||
SCL - S+C+L Band 1460-1620nm | B - 250um Bare Fiber | 05 - 0.5m | NE - None | ||||
9 - 900um Loose Tube | 10 - 1.0m | FA - FC/APC | |||||
2 - 2.0mm Loose Tube | 15 - 1.5m | FU - FC/UPC | |||||
3 - 3.0mm Loose Tube | 20 - 2.0m | SA - SC/APC | |||||
SS - Specify | SU - SU/APC | ||||||
LA - LC/APC | |||||||
LU - LC/UPC | |||||||
SS - Specify | |||||||