| 2000nm In Line Polarizer | ||||||||||||
|
2000nm In Line Polarizer is a fiber optic passive component which can be used for converting the non polariaered light to a polarized light, it only allows the polarization light that parallleled to the polarizer to pass and block the other polarization, it also can be used to enhance extinction ratio of the polarization light. High power type is also available upon request. |
||||||||||||
|
||||||||||||
|
Application: |
Features: |
|||||||||||
|
Fiber Optic Amplifier Fiber Optic Sensor Fiber Laser Lab And Research |
High Extinction Ratio High Power Available Low Insertion Loss High Reliability |
|||||||||||
| Specification: | ||||||||||||
| Parameter | Symbol | Value | Unit | |||||||||
| Center Wavelength | λ | 2000 | nm | |||||||||
| Bandwidth | BW | ±40 | nm | |||||||||
| Typ. Insertion Loss | IL | 0.6 | dB | |||||||||
| Max. Insertion Loss | IL | 1.0 | dB | |||||||||
| Typ. Extinction Ratio | ER | 22 | dB | |||||||||
| Min. Extinction Ratio | ER | 20 | dB | |||||||||
| Min. Return Loss | RL | 50 | dB | |||||||||
| Max. Optical Power (CW) | P | 300 | mW | |||||||||
| Max. Tensil Load | 5 | N | ||||||||||
| Fiber Type | PM Panda fiber or SM 1950 fiber | - | ||||||||||
| Operating Temperature | T | -5~70 | ℃ | |||||||||
| Storage Temperature | T | -40~85 | ℃ | |||||||||
| Package Dimension | Φ5.5×L35 | mm | ||||||||||
| Notice: Above specifications are tested at center wavelength without connector in room temperature @23℃. | ||||||||||||
| For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower, ER will be 2dB lower, slow axis is default aligned to the connector key. | ||||||||||||
| Drawing: |
|
|||||||||||
| Ordering Information (Part Number): | ||||||||||||
| ILP-WWWW-FF-J-LL-CC | ||||||||||||
| WWWW | FF | J | LL | CC | ||||||||
| Wavelength | Fiber Type (Input/Output) | Fiber Jacket | Fiber Length | Connector | ||||||||
| 1940 - 1940nm | PP - PM fiber on input and output port | B - 250um Bare Fiber | 05 - 0.5m | NE - None | ||||||||
| 1950 - 1950nm | SS - SM fiber on input and output port | 9 - 900um Loose Tube | 10 - 1.0m | FA - FC/APC | ||||||||
| 2000 - 2000nm | PS - PM fiber on input port | 15 - 1.5m | FU - FC/UPC | |||||||||
| 2050 - 2050nm | SM fiber on output port | 20 - 2.0m | SA - SC/APC | |||||||||
| SP - SM fiber on input port | SS - Specify | SU - SU/APC | ||||||||||
| PM fiber on output port | LA - LC/APC | |||||||||||
| LU - LC/UPC | ||||||||||||
| SS - Specify | ||||||||||||
