| 2000nm 1x3 SM Monolithic Fiber Fused Coupler | |||||||||||||
|
2000nm 1x3 SM Monolithic Fiber Fused Coupler is built with fused biconical taper (FBT) technology, optical signal power can be splitted into three parts with even or various coupling ratio by the FBT Coupler, it's widely applied in fiber optic transmission and fiber optic sensor field, the MM and PM types are available upon request. |
|||||||||||||
|
|||||||||||||
|
Application: |
Features: |
||||||||||||
|
Optical Amplifier Fiber Optic Sensor Coherent Communication Optical Diffraction System |
Low Excess Loss High Return Loss Low Insertion Loss High Reliability |
||||||||||||
| Specification: | |||||||||||||
| Parameter | Symbol | Value | Unit | ||||||||||
| Center Wavelength | λ | 1940, 1950, 2000, 2050 | nm | ||||||||||
| Bandwidth | BW | ±15 | nm | ||||||||||
| Max. Excess Loss | EL | 0.6 | dB | ||||||||||
|
Max. Insertion Loss (For 1x3 Configuration) |
0.5/99/0.5 | IL | 24.5/0.25/24.5 | dB | |||||||||
| 1/98/1 | 21.5/0.25/21.5 | dB | |||||||||||
| 2.5/95/5 | 17.8/0.4/17.8 | dB | |||||||||||
| 5/90/5 | 14.7/0.65/14.7 | dB | |||||||||||
| 10/80/10 | 10.8/1.1/10.8 | dB | |||||||||||
| 15/70/15 | 9.0/2.1/9.0 | dB | |||||||||||
| 20/60/20 | 7.4/2.8/7.4 | dB | |||||||||||
| 25/50/25 | 6.6/3.4/6.6 | dB | |||||||||||
| 30/40/30 | 5.7/4.4/5.7 | dB | |||||||||||
| 33/33/33 | 5.4/5.4/5.4 | dB | |||||||||||
| 35/30/35 | 5.2/5.7/5.2 | dB | |||||||||||
| 40/20/40 | 4.5/7.8/4.5 | dB | |||||||||||
| Max. Polarization Dependent Loss | PDL | 0.15 | dB | ||||||||||
| Min. Directivity | 50 | dB | |||||||||||
| Min. Return Loss | RL | 50 | dB | ||||||||||
| Fiber Type | SMF-28e or SM 1950 fiber | - | |||||||||||
| Max. Tensil Load | 5 | N | |||||||||||
| Max. Optical Power (CW) | P | 2 | W | ||||||||||
| Operating Temperature | T | -40~85 | ℃ | ||||||||||
| Storage Temperature | T | -40~85 | ℃ | ||||||||||
| Package Dimension |
Φ3.0xL54 for Bare Fiber Φ4.0xL75 for Bare Fiber or 900um Loose Tube 90x20x10 for 0.9, 2.0 or 3.0mm Loose Tube |
mm | |||||||||||
| Notice: Above specifications are tested at center wavelength without connector in room temperature @23℃. | |||||||||||||
| For devices with connectors, IL will be 0.3dB higher, RL will be 5dB lower, Connectors only 1W (Continue Wavelength) optical power guarantee. | |||||||||||||
| Drawing: |
|
||||||||||||
| Ordering Information (Part Number): | |||||||||||||
| SMFUC-WWWW-PP-RR-FF-D-J-LL-CC | |||||||||||||
| WWWW | PP | RR | FF | D | J | LL | CC | ||||||
| Wavelength | Port |
Coupling Ratio |
Fiber Type |
Package Dimension |
Fiber Jacket | Fiber Length | Connector | ||||||
| 1940 - 1940nm | 13 - 1x3 | 0.5 - 0.5/99/0.5 | S2 - SMF-28e | 1 - Φ3.0x54mm | B - 250um | 05 - 0.5m | NE - None | ||||||
| 1950 - 1950nm | 01 - 1/98/1 | S1 - SM 1950 | 2 - Φ4.0x75mm | Bare Fiber | 10 - 1.0m | FA - FC/APC | |||||||
| 2000 - 2000nm | 2.5 - 2.5/95/5 | SS - Specify | 3 - 90x20x10mm | 9 - 900um Loose | 15 - 1.5m | FU - FC/UPC | |||||||
| 2050 - 2050nm | 05 - 5/90/5 | 4 - 100x80x10mm | Tube | 20 - 2.0m | SA - SC/APC | ||||||||
| SSSS - Specify | 10 - 10/80/10 | 2 - 2.0mm Loose | SS - Specify | SU - SU/APC | |||||||||
| 15 - 15/70/15 | Tube | LA - LC/APC | |||||||||||
| 20 - 20/60/20 | 3 - 3.0mm Loose | LU - LC/UPC | |||||||||||
| 25 - 25/50/25 | Tube | SS - Specify | |||||||||||
| 30 - 30/40/30 | |||||||||||||
| 33 - 33/33/33 | |||||||||||||
| 35 - 35/30/35 | |||||||||||||
| 40 - 40/20/40 | |||||||||||||
| SS - Specify | |||||||||||||
