1310nm PM 80um Cladding Fiber Patchcord | ||||||||||
1310nm Polarization Maintaining (PM) 80um Cladding Fiber Patchcord is built with PM Panda fiber, it's used for polarized light transmission and keep the light polarization maintaining, the connector ferrule is special customized for 80um clad, the termination connector can be FC, SC, LC. It features low insertion loss and high extinction ratio. |
||||||||||
Application: | Features: |
|
||||||||
Fiber Optic Gyroscope Fiber Optic Sensor Fiber Amplifier System Testing System |
High Extinction Ratio High Return Loss Low Insertion Loss High Reliability |
|||||||||
Optical Specification: | ||||||||||
Parameter | Symbol | Value | Unit | |||||||
Center Wavelength | λ | 1310 | nm | |||||||
Typ. Insertion Loss | IL | 0.3 | dB | |||||||
Max. Insertion Loss | IL | 0.5 | dB | |||||||
Min. Extinction Loss | ER | 22 | dB | |||||||
Min. Return Loss | RL | 50 for UPC, 60 for APC | dB | |||||||
Fiber Type | PM 80um Cladding Panda Fiber | - | ||||||||
Connector Key Alignment | ±3° | - | ||||||||
Tensil Load | 5 | N | ||||||||
Max. Optical Power | P | 300 | mW | |||||||
Operating Temperature | T | -5~70 | ℃ | |||||||
Storage Temperature | T | -40~85 | ℃ | |||||||
Notice: Above specifications are tested at center wavelength in room temperature @23℃. | ||||||||||
Slow axis is default aligned to the connector key. | ||||||||||
Drawing: | ||||||||||
|
||||||||||
Ordering Information (Part Number): | ||||||||||
PMRFP-WWWW-J-LL-CC-CC | ||||||||||
WWWW | J | LL | CC | CC | ||||||
Wavelength | Fiber Jacket | Fiber Length | Connector 1 | Connector 2 | ||||||
1310 - 1310nm | B - 165um Bare Fiber | 05 - 0.5m | FA - FC/APC | FA - FC/APC | ||||||
1550 - 1550nm | 9 - 0.9mm Loose Tube | 10 - 1.0m | FU - FC/UPC | FU - FC/UPC | ||||||
2 - 2.0mm Loose Tube | 15 - 1.5m | SA - SC/APC | SA - SC/APC | |||||||
3 - 3.0mm Loose Tube | 20 - 2.0m | SU - SC/UPC | SU - SC/UPC | |||||||
30 - 3.0m | LA - LC/APC | LA - LC/APC | ||||||||
SS - Specify | LU- LC/UPC | LU - LC/UPC | ||||||||